some devices for protecting some parts of check valves
Check Valves can stop material from constantly flowing backwards when a device
is off, which can save power and protect the parts of the device.
1 Turn off
and disconnect the power source to the pump before attempting to do anything
with it to avoid electrical shock.
2 Remove the old Piston Check Valve from
the intake if you are replacing it.
3 Check the manual of the pump if you
still have it, or the specifications for your make and model online. These
sources will specify the inlet connection size.
4 Measure the inlet pipe or
the outlet of the old Check Valve across the widest point to get the diameter if
you cannot locate the specification.
5 Write the measurement down and keep it
with you so you have a reference when shopping for the new Check Valve.
More products of valves
