Control Valve Series

Product drawing»

Structural drawing»

You are here: News

News

Rotating in reverse direction 2010-12-08
Assuming that the pump is OFF, and the check valve is leaking and the water is comming baack to the pump causing a rever
Water motor gongs 2010-12-08
I have noticed a trend over the past few years. Many new sprinkler systems are installed with no water motor gong and no
What does pump run back refer to? 2010-12-07
I'm new to to pump selection and engineering (as well as the forum). I have heard and read the term "pump run back" and
Test procedure for butt weld end valve 2010-12-07
I would like to know the shop procedure for hydrostatic test butt weld end valve as per API 598. This procedure should b
Closed loop pneumatically actuated valve operation 2010-12-07
During normal operation, the actuator to the main valve is held closed by an 80 psi instrument air line. Upon loss of a
Discharge pressure on submersible pump 2010-12-06
I am troubleshooting pump performance on a 58hp submersible Flygt pump. I want to install a pressure gage on the dischar
VSD output damage 2010-12-06
We have the output damaged on a VSD driving a 1200kW cyclone pump on a mine. After three weeks of operation the drive di
Need help to design an ammonia absorber 2010-12-06
We have a 5000 US gal tank for aqua ammonia storage. We fill this tank from tanker truck by air compressor. Filling is f
Kaiweixi Valve Group Co., Ltd.
Kaiweixi control valve Contact Kaiweixi
Zhejiang Shanliu Valve Technology Co., Ltd.
Shanliu control valve Contact Shanliu
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi control valve Contact FengQi
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi control valve Contact MeiYan Yi