Check Valve Series

Product drawing»

Structural drawing»

You are here: News

News

Best way to stop air cylinder with a light curtain application? 2010-12-09
What are your thoughts about the best way to stop air cylinder with a light curtain application? Lets say it's mounted v
Your interpetation of B31.1 para 122.1.7(B)(B.1) 2010-12-09
I know this is a piping code, but I posted this question here because it applies to Boiler External Piping. In the above
pipe vibration in stainless steel pipe 2010-12-09
I have a pipe vibration issue. Each time the submersible pumps starts the stainless steel pipe vibrates. I have two stat
chiller's shoot-off valves 2010-12-08
As is known, obligatory attributes, necessary at installation chiller, are so-called shoot-off valves.
Rotating in reverse direction 2010-12-08
Assuming that the pump is OFF, and the check valve is leaking and the water is comming baack to the pump causing a rever
Water motor gongs 2010-12-08
I have noticed a trend over the past few years. Many new sprinkler systems are installed with no water motor gong and no
What does pump run back refer to? 2010-12-07
I'm new to to pump selection and engineering (as well as the forum). I have heard and read the term "pump run back" and
Test procedure for butt weld end valve 2010-12-07
I would like to know the shop procedure for hydrostatic test butt weld end valve as per API 598. This procedure should b
 Kaiweixi Valve Group Co., Ltd.
Kaiweixi check valve Contact Kaiweixi
Zhejiang Shanliu Valve Technology Co., Ltd.
Shanliu Check Valve Contact Shanliu
Shanghai FengQi Industrial Development CO., Lid.
FengQi Check Valve Contact FengQi
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi check valve Contact MeiYan Yi