Control Valve Series

Product drawing»

Structural drawing»

You are here: News

News

looking for a lightweight low pressure valve with fast response time 2010-10-25
Working on a very u-neek 7/8" gate valve and need a company to help finalize design and prototype, and possibly mass pro
stellite on ball 2010-10-25
We have one order from my client to supply ON/OFF valve from size 4 up to 24 inch.
Pressure Relief Valve (PRV) 2010-10-22
It is always recommended to provide a Pressure Relief Valve (PRV) to minimize inventory lost to flare and drain disposal
The Step Tests of a valve 2010-10-22
First of all, keep a careful record of the existing tuning parameters and any other values which are likely to be change
Recycle Valve 2010-10-22
As with any controller, the performance of the control valve is critical to the correct and stable operation of the loop
Safety Features in Manual 2010-10-22
If you intend using open-loop step response techniques to tune the anti-surge controller, it is helpful to know that the
Tuning Anti-surge Controllers 2010-10-22
This document discusses the tuning of anti-surge controllers on centrifugal compressors, most of which are designed arou
High/Low Output Selects 2010-10-22
Figure 1 shows a typical control scheme with two controllers driving the same control valve via high select logic.
Kaiweixi Valve Group Co., Ltd.
Kaiweixi control valve Contact Kaiweixi
Zhejiang Shanliu Valve Technology Co., Ltd.
Shanliu control valve Contact Shanliu
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi control valve Contact FengQi
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi control valve Contact MeiYan Yi